References

1. ^ MCC – the official Laws of Cricket. Retrieved on 25 July 2009.
2. ^ CricketArchive – full list of ICC member countries. Retrieved on 25 July 2009.
3. ^ John Major, More Than A Game, HarperCollins, 2007
4. ^ John Leach, From Lads to Lord's quotes the precise date of the accounting entry as Thursday 10 March 1300 (Julian date), which is in the Gregorian year of 1301. Retrieved on 31 January 2009.
5. ^ John Leach, From Lads to Lord's quotes the precise date of the court case in Guildford as Monday, 17 January 1597 (Julian date), which is in the Gregorian year of 1598. Retrieved on 31 January 2009.
6. ^ Middle Dutch was the language in use in Flanders at the time.
7. ^ Birley, p.3
8. ^ Birley, op. cit.
9. ^ Altham, p.21
10. ^ Bowen, p.33
11. ^ David Terry, The Seventeenth Century Game of Cricket: A Reconstruction of the Game. Retrieved on 25 July 2009.
12. ^ Gillmeister's theory is summarised in the introduction to the bookThe Language of Cricket by John Eddowes, ISBN 1-85754-270-3.
13. ^ David Underdown, Start of Play, Allen Lane, 2000, p.3
14. ^ ^a b H S Altham, A History of Cricket, Volume 1 (to 1914), George Allen & Unwin, 1962, p.21
15. ^ Timothy J McCann, Sussex Cricket in the Eighteenth Century, Sussex Record Society, 2004
16. ^ CricketArchive profile. Retrieved on 25 July 2009.
17. ^ The Australian Eleven: The first Australian team, National Museum of Australia. Retrieved on 24 May 2011.

Cricket statistics

• Innings (I): The number of innings in which the batsman actually batted.
• Not outs (NO): The number of times the batsman was not out at the conclusion of an innings they batted in.¹
• Runs (R): The number of runs scored.
• Highest Score (HS/Best): The highest score ever made by the batsman.
• Batting Average (Ave): The total number of runs divided by the total number of innings in which the batsman was out. Ave = Runs/[I - NO] (also Avge or Avg.)
• Centuries (100): The number of innings in which the batsman scored one hundred runs or more.
• Half-centuries (50): The number of innings in which the batsman scored fifty to ninety-nine runs (centuries do not count as half-centuries as well).
• Balls Faced (BF): The total number of balls received, including no balls but not including wides.
• Strike Rate (SR): The number of runs scored per 100 balls faced. (SR = [100 * Runs]/BF)
• Run Rate (RR): Is the number of runs a batsman (or the batting side) scores in an over of six balls.

The basic bowling statistics include:

• Overs (O): The number of overs bowled.
• Balls (B): The number of balls bowled. Overs is more traditional, but balls is a more useful statistic because the number of balls per over has varied historically.
• Maiden Overs (M): The number of maiden overs (overs in which the bowler conceded zero runs) bowled.
• Runs (R): The number of runs conceded.
• Wickets (W): The number of wickets taken.
• No balls (Nb): The number of no balls bowled.
• Wides (Wd): The number of wides bowled.

Statistics

Organized cricket lends itself to statistics to a greater degree than many other sports. Each play is discrete and has a relatively small number of possible outcomes. At the professional level, statistics for Test cricket, one-day internationals, and first-class cricket are recorded separately. However, since Test matches are a form of first-class cricket, a player's first-class statistics will include his Test match statistics—but not vice versa. The Guide to Cricketers was a cricket annual edited by Fred Lillywhite between 1849 and his death in 1866. Wisden Cricketers' Almanack was founded in 1864 by the English cricketer John Wisden (1826–1884) as a competitor to The Guide to Cricketers. Its annual publication has continued uninterrupted to the present day, making it the longest running sports annual in history.

Certain traditional statistics are familiar to most cricket fans. The basic batting statistics include:

• Innings (I): The number of innings in which the batsman actually batted.
• Not outs (NO): The number of times the batsman was not out at the conclusion of an innings they batted in.¹
• Runs (R): The number of runs scored.
• Highest Score (HS/Best): The highest score ever made by the batsman.
• Batting Average (Ave): The total number of runs divided by the total number of innings in which the batsman was out. Ave = Runs/[I - NO] (also Avge or Avg.)
• Centuries (100): The number of innings in which the batsman scored one hundred runs or more.
• Half-centuries (50): The number of innings in which the batsman scored fifty to ninety-nine runs (centuries do not count as half-centuries as well).

International structure

The International Cricket Council (ICC), which has its headquarters in Dubai, is the international governing body of cricket. It was founded as the Imperial Cricket Conference in 1909 by representatives from England, Australia and South Africa, renamed the International Cricket Conference in 1965, and took up its current name in 1989.

Full Members are the governing bodies for cricket in a country or associated countries. Full Members may also represent a geographical area. All Full Members have a right to send one representative team to play official Test matches. Also, all Full Member nations are automatically qualified to play ODIs and Twenty20 Internationals.^[40] West Indies cricket team does not represent one country instead an amalgamation of over 20 countries from the Caribbean. The English Cricket team represents both England and Wales.

The ICC has 104 members: 10 Full Members that play official Test matches, 34 Associate Members, and 60 Affiliate Members.^[39] The ICC is responsible for the organisation and governance of cricket's major international tournaments, notably the Cricket World Cup. It also appoints the umpires and referees that officiate at all sanctioned Test matches, One Day International and Twenty20 Internationals. Each nation has a national cricket board which regulates cricket matches played in its country. The cricket board also selects the national squad and organises home and away tours for the national team. In the West Indies these matters are addressed by the West Indies Cricket Board which consists of members appointed by four national boards and two multi

-national boards

Other types of matches

There are numerous variations of the sport played throughout the world that include indoor cricket,French cricket, beach cricket, Kwik cricket and all sorts of card games and board games that have been inspired by cricket. In these variants, the rules are often changed to make the game playable with limited resources or to render it more convenient and enjoyable for the participants.

Indoor cricket is played in a netted, indoor arena, and is quite formal but many of the outdoor variants are very informal.

Families and teenagers play backyard cricket in suburban yards or driveways, and the cities of India and Pakistan play host to countless games of "Gully Cricket" or "tapeball" in their long narrow streets. Sometimes the rules are improvised: e.g. it may be agreed that fielders can catch the ball with one hand after one bounce and claim a wicket; or if only a few people are available then everyone may field while the players take it in turns to bat and bowl. Tennis balls and homemade bats are often used, and a variety of objects may serve as wickets: for example, the batter's legs as in French cricket, which did not in fact originate in France, and is usually played by small children.

National championships

First-class cricket includes Test cricket but the term is generally used to refer to the highest level of domestic cricket in those countries with full ICC membership, although there are exceptions to this. First-class cricket in England is played for the most part by the 18 county clubs which contest the County Championship. The concept of a champion county has existed since the 18th century but the official competition was not established until 1890. The most successful club has been Yorkshire County Cricket Club with 30 official titles.

Australia established its national first-class championship in 1892–93 when the Sheffield Shield was introduced. In Australia, the first-class teams represent the various states. New South Wales has won the maximum number of titles with 45 to 2008.

National championship trophies to be established elsewhere included the Ranji Trophy(India), Plunket Shield (New Zealand), Currie Cup (South Africa) and Shell Shield (West Indies). Some of these competitions have been updated and renamed in recent years.

Domestic limited overs competitions began with England's Gillette Cup knockout in 1963. Countries usually stage seasonal limited overs competitions in both knockout and league format. In recent years, national Twenty20 competitions have been introduced, usually in knockout form though some incorporate mini-leagues.

Limited overs

Standard limited overs cricket was introduced in England in the 1963 season in the form of a knockout cup contested by the first-class county clubs. In 1969, a national league competition was established. The concept was gradually introduced to the other major cricket countries and the first limited overs international was played in 1971. In 1975, the firstCricket World Cup took place in England. Limited overs cricket has seen various innovations including the use of multi-coloured kit and floodlit matches using a white ball.

A "one day match", named so because each match is scheduled for completion in a single day, is the common form of limited overs cricket played on an international level. In practice, matches sometimes continue on a second day if they have been interrupted or postponed by bad weather. The main objective of a limited overs match is to produce a definite result and so a conventional draw is not possible, but matches can be undecided if the scores are tied or if bad weather prevents a result. Each team plays one innings only and faces a limited number of overs, usually a maximum of 50. The Cricket World Cup is held in one day format and the last World Cup in 2011 was won by the co-hosts, India. The next World Cup will hosted by Australia and New Zealand in 2015.

Twenty20 is a new variant of limited overs itself with the purpose being to complete the match within about three hours, usually in an evening session. The original idea, when the concept was introduced in England in 2003, was to provide workers with an evening entertainment. It was commercially successful and has been adopted internationally. The inaugural Twenty20 World Championship was held in 2007 and won by India. 2009's Twenty20 World 

Test cricket

Test cricket is the highest standard of first-class cricket. A Test match is an international fixture between teams representing those countries that are Full Members of the ICC.

Although the term "Test match" was not coined until much later, Test cricket is deemed to have begun with two matches between Australia and England in the 1876–77 Australian season. Subsequently, eight other national teams have achieved Test status: South Africa(1889), West Indies (1928), New Zealand (1929), India (1932), Pakistan (1952), Sri Lanka(1982), Zimbabwe (1992) and Bangladesh (2000). Zimbabwe subsequently suspended its Test status in 2006 due to its inability to compete against other Test teams and has yet to resume playing Test cricket.^[37]

Welsh players are eligible to play for England, which is in effect an England and Wales team. The West Indies team comprises players from numerous states in the Caribbean, notably Barbados, Guyana, Jamaica, Trinidad & Tobago, the Leeward Islands and the Windward Islands.

Test matches between two teams are usually played in a group of matches called a "series". Matches last up to five days and a series normally consists of three to five matches. Test matches that are not finished within the allotted time are drawn. In the case of Test and first-class cricket: the possibility of a draw often encourages a team that is batting last and well behind to bat defensively, giving up any faint chance at a win to avoid a loss.^[38]

Types of matches

Cricket is a multi-faceted sport which, in very broad terms, can be divided into major cricket and minor cricket based on playing standards. A more pertinent division, particularly in terms of major cricket, is between matches in which the teams have two innings apiece and those in which they have a single innings each. The former, known as first-class cricket, has a duration of three to five days (there have been examples of "timeless" matches too); the latter, known as limited overs cricket because each team bowls a limit of typically 50 or 20 overs, has a planned duration of one day only (a match can be extended if necessary due to bad weather, etc.).

Typically, two-innings matches have at least six hours of playing time each day. Limited overs matches often last six hours or more. There are usually formal intervals on each day for lunch and tea with brief informal breaks for drinks. There is also a short interval between innings. Historically, a form of cricket known as single wicket had been extremely successful and many of these contests in the 18th and 19th centuries qualify as major cricket matches. In this form, although each team may have from one to six players, there is only one batsman at a time and he must face every delivery bowled while his innings lasts. Single wicket has rarely been played since limited overs cricket began.

Uniqueness of each field

Unlike those of most sports, cricket playing fields can vary significantly in size and shape. While the dimensions of the pitch and infield are specifically regulated, the Laws of Cricket do not specify the size or shape of the field.^[22] The field boundaries are sometimes painted and sometimes marked by a rope. Pitch and outfield variations can have a significant effect on how balls behave and are fielded as well as on batting. Pitches vary in consistency, and thus in the amount of bounce, spin, and seam movement available to the bowler. Hard pitches are usually good to bat on because of high but even bounce. Dry pitches tend to deteriorate for batting as cracks often appear, and when this happens to the pitch, spinners can play a major role. Damp pitches, or pitches covered in grass (termed "green" pitches), allow good fast bowlers to extract extra bounce. Such pitches tend to offer help to fast bowlers throughout the match, but become better for batting as the game goes on. While players of other outdoor sports deal with similar variations of field surface and stadium covering, the size and shape of their fields are much more standardized. Other local factors, such as altitude and climate, can also significantly affect play. These physical variations create a distinctive set of playing conditions at each ground. A given ground may acquire a reputation as batsman friendly or bowler friendly if one or the other discipline notably benefits from its unique mix of elements. The absence of a standardized field affects not only how particular games play out, but the nature of team makeup and players' statistical records.

Influence of weather

Cricket is a sport played predominantly in the drier periods of the year. But, even so, the weather is a major factor in all cricket matches.

A scheduled game of cricket cannot be played in wet weather. Dampness affects the bounce of the ball on the wicket and is a risk to all players involved in the game. Many grounds have facilities to cover the cricket pitch (or the wicket). Covers can be in the form of sheets being laid over the wicket to elevated covers on wheels (using the same concept as an umbrella) to even hover covers which form an airtight seal around the wicket. However, most grounds do not have the facilities to cover the outfield. This means that in the event of heavy bouts of bad weather, games may be cancelled, abandoned or suspended due to an unsafe outfield.

Another factor in cricket is the amount of light available. At grounds without floodlights (or in game formats which disallow the use of floodlights), umpires can stop play in the event of bad light as it becomes too difficult for the batsmen to be able to see the ball coming at them, (and in extreme cases, members of the fielding team).

On the other hand, in instances of good light, batsmen can utilize sight-screens which enable batsmen to have a white background against which they can pick out the red ball (or black background for white ball) with greater ease.

The umpires always have the final decision on weather related issues.

Individual focus

For a team sport, cricket places individual players under unusual scrutiny and pressure. Bowler, Batsman, and fielder all act essentially independent of each other. While team managements can signal bowler or batsman to pursue certain tactics, the execution of the play itself is a series of solitary acts. Cricket is more similar to baseball than many other team sports in this regard: while the individual focus in cricket is slightly mitigated by the importance of the batting partnership and the practicalities of running, it is enhanced by the fact that a batsman may occupy the wicket for a long time.Cricket is a unique game where in addition to the laws, the players have to abide by Spirit of the Game.^[36] The standard of sportsmanship has historically been considered so high that the phrase "it's just not cricket" was coined in the 19th Century to describe unfair or underhanded behaviour in any walk of life. In the last few decades though, cricket has become increasingly fast-paced and competitive, increasing the use of appealing and sledging, although players are still expected to abide by the umpires' rulings without argument, and for the most part they do. Even in the modern game fielders are known to signal to the umpire that a boundary was hit, despite what could have been considered a spectacular save (though they might be found out by the TV replays anyway). In addition to this, some cricket batsmen, like Sachin Tendulkar and Adam Gilchrist have been known to "walk" when they think they are out even if the umpire does not declare them out. This is a high level of sportsmanship, as a batsman can easily take advantage of incorrect umpiring decisions.

Influence of weather

Results

If the team that bats last is all out having scored fewer runs than their opponents, the team is said to have "lost by n runs" (where n is the difference between the number of runs scored by the teams). If the team that bats last scores enough runs to win, it is said to have "won by nwickets", where n is the number of wickets left to fall. For instance a team that passes its opponents' score having only lost six wickets would have won "by four wickets".

In a two-innings-a-side match, one team's combined first and second innings total may be less than the other side's first innings total. The team with the greater score is then said to have won by an innings and n runs, and does not need to bat again: n is the difference between the two teams' aggregate scores.

If the team batting last is all out, and both sides have scored the same number of runs, then the match is a tie; this result is quite rare in matches of two innings a side. In the traditional form of the game, if the time allotted for the match expires before either side can win, then the game is declared a draw.

If the match has only a single innings per side, then a maximum number of deliveries for each innings is often imposed. Such a match is called a "limited overs" or "one-day" match, and the side scoring more runs wins regardless of the number of wickets lost, so that a draw cannot occur. If this kind of match is temporarily interrupted by bad weather, then a complex mathematical formula, known as the Duckworth-Lewis method after its developers, is often used to recalculate a new target score. A one-day match can also be declared a "no-result" if fewer than a previously agreed number of overs have been bowled by either team, in circumstances that make normal resumption of play impossible; for example, wet weathe

Dismissals (outs)

1. Bowled: the bowler has hit the wicket with the ball and the wicket has "broken" with at least one bail being dislodged (note that if the ball hits the wicket without dislodging a bail it is not out).^[26]
2. Caught: the batsman has hit the ball with his bat, or with his hand which was holding the bat, and the ball has been caught before it has touched the ground by a member of the fielding side.^[27]
3. Leg before wicket (lbw): first and foremost, the ball must, in the opinion of the on-field umpire, be going on to hit the stumps if the ball had not hit the pad of the batsman first. If the batsman plays an attempted shot to the delivery, then the ball must hit the batsman's pad in line with the stumps and be going on to hit the stumps for the batsman to be given out. If the batsman does not attempt to play a shot, then the ball does not have to hit the pad in line with the stumps but it still must be going on to hit the stumps. If the ball pitches outside the leg stump, then the batsman cannot be http://t2.gstatic.com/images?q=tbn:ANd9GcS4t4ixcnz6MupcDXDBxe_dxAP3d9IfqIu4YoDg0vlxdaPtPvJRgivehttp://t2.gstatic.com/images?q=tbn:ANd9GcS4t4ixcnz6MupcDXDBxe_dxAP3d9IfqIu4YoDg0vlxdaPtPvJRn out under any circumstances.^[28]
4. Run out: a member of the fielding side has broken or "put down" the wicket with the ball while a batsman was out of his ground; this usually occurs by means of an accurate throw to the wicket while the batsmen are attempting a run.^[29]
5. Stumped is similar except that it is done by the wicketkeeper after the batsman has missed the bowled ball and has stepped out of his ground, and is not attempting a run.^[30]
6. Hit wicket: a batsman is out hit wicket, if he dislodges one or both bails with his bat, person, clothing or equipment in the act of receiving a ball, or in setting off for a run having just received a ball.^[31]
7. Hit the ball twice is very unusual and was introduced as a safety measure to counter dangerous play and protect the fielders. The batsman may legally play the ball a second time only to stop the ball hitting the wicket after he has already played it.^[32]

Extras

Additional runs can be gained by the batting team as extras (called "sundries" in Australia) due to errors made by the fielding side. This is achieved in four ways:

1. No ball: a penalty of one extra that is conceded by the bowler if he breaks the rules of bowling either by (a) using an inappropriate arm action; (b) overstepping the popping crease; (c) having a foot outside the return crease. In addition, the bowler has to re-bowl the ball. In limited overs matches, a no ball is called if the bowling team's field setting fails to comply with the restrictions. In shorter formats of the game (20–20, ODI) the free hit rule has been introduced. The ball following a front foot no-ball will be a free-hit for the batsman, whereby he is safe from losing his wicket except for being run-out.
2. Wide: a penalty of one extra that is conceded by the bowler if he bowls so that the ball is out of the batsman's reach; as with a no ball, a wide must be re-bowled.
3. Bye: extra(s) awarded if the batsman misses the ball and it goes past the wicketkeeper to give the batsmen time to run in the conventional way (note that one mark of a good wicketkeeper is one who restricts the tally of byes to a minimum).
4. Leg bye: extra(s) awarded if the ball hits the batsman's body, but not his bat, while attempting a legitimate shot, and it goes away from the fielders to give the batsmen time to run in the conventional way.

When the bowler has bowled a no ball or a wide, his team incurs an additional penalty because that ball (i.e., delivery) has to be bowled again and hence the batting side has the opportunity to score more runs from this extra ball. The batsmen have to run (i.e., unless the ball goes to the boundary for four) to claim byes and leg byes but these only count towards the team total, not to the striker's individual total for which runs must be scored off the bat.

Runs

The primary concern of the batsman on strike (i.e., the "striker") is to prevent the ball hitting the wicket and secondarily to score runs by hitting the ball with his bat so that he and his partner have time to run from one end of the pitch to the other before the fielding side can return the ball. To register a run, both runners must touch the ground behind the crease with either their bats or their bodies (the batsmen carry their bats as they run). Each completed run increments the score.

More than one run can be scored from a single hit; but, while hits worth one to three runs are common, the size of the field is such that it is usually difficult to run four or more. To compensate for this, hits that reach the boundary of the field are automatically awarded four runs if the ball touches the ground en route to the boundary or six runs if the ball clears the boundary on the full. The batsmen do not need to run if the ball reaches or crosses the boundary.

Sachin Tendulkar is a legendary Indian batsman who holds multiple records, including highest number of runs and centuries scored in bothTest and ODI forms of Cricket.

Hits for five are unusual and generally rely on the help of "overthrows" by a fielder returning the ball. If an odd number of runs is scored by the striker, the two batsmen have changed ends, and the one who was non-striker is now the striker. Only the striker can score individual runs, but all runs are added to the team's total.

Batting

At any one time, there are two batsmen in the playing area. One takes station at the striker's end to defend the wicket as above and to score runs if possible. His partner, the non-striker, is at the end where the bowler is operating.

Batsmen come in to bat in a batting order, decided by the team captain. The first two batsmen – the "openers" – usually face the hostile bowling from fresh fast bowlers with a new ball. The top batting positions are usually given to the most competent batsmen in the team, and the non-batsmen typically bat last. The pre-announced batting order is not mandatory and when a wicket falls any player who has not yet batted may be sent in next.

If a batsman "retires" (usually due to injury) and cannot return, he is actually "not out" and his retirement does not count as a dismissal, though in effect he has been dismissed because his innings is over. Substitute batsmen are not allowed.

A skilled batsman can use a wide array of "shots" or "strokes" in both defensive and attacking mode. The idea is to hit the ball to best effect with the flat surface of the bat's blade. If the ball touches the side of the bat it is called an "edge". Batsmen do not always seek to hit the ball as hard as possible, and a good player can score runs just by making a deft stroke with a turn of the wrists or by simply "blocking" the ball but directing it away from fielders so that he has time to take a run.

Fielding

All eleven players on the fielding side take the field together. One of them is the wicket-keeperaka "keeper" who operates behind the wicket being defended by the batsman on strike. Wicket-keeping is normally a specialist occupation and his primary job is to gather deliveries that the batsman does not hit, so that the batsmen cannot run byes. He wears special gloves (he is the only fielder allowed to do so), a box over the groin, and pads to cover his lower legs. Owing to his position directly behind the striker, the wicket-keeper has a good chance of getting a batsman out caught off a fine edge from the bat. He is the only player who can get a batsman out stumped.

Apart from the one currently bowling, the other nine fielders are tactically deployed by the team captain in chosen positions around the field. These positions are not fixed but they are known by specific and sometimes colourful names such as "slip", "third man", "silly mid on" and "long leg". There are always many unprotected areas.

The captain is the most important member of the fielding side as he determines all the tactics including who should bowl (and how); and he is responsible for "setting the field", though usually in consultation with the bowler.

In all forms of cricket, if a fielder gets injured or becomes ill during a match, a substitute is allowed to field instead of him. The substitute cannot bowl, act as a captain or keep wicket. The substitute leaves the field when the injured player is fit to return.

Bowling

The bowler reaches his delivery stride by means of a "run-up", although some bowlers with a very slow delivery take no more than a couple of steps before bowling. A fast bowler needs momentum and takes quite a long run-up, running very fast as he does so.

The fastest bowlers can deliver the ball at a speed of over 90 miles per hour (140 km/h) and they sometimes rely on sheer speed to try and defeat the batsman, who is forced to react very quickly. Other fast bowlers rely on a mixture of speed and guile. Some fast bowlers make use of the seam of the ball so that it "curves" or "swings" in flight. This type of delivery can deceive a batsman into mistiming his shot so that the ball touches the edge of the bat and can then be "caught behind" by the wicketkeeper or a slip fielder.

. The batsman has to be very wary of such deliveries as they are often "flighted" or spun so that the ball will not behave quite as he expects and he could be "trapped" into getting himself out.

At the other end of the bowling scale is the "spinner" who bowls at a relatively slow pace and relies entirely on guile to deceive the batsman. A spinner will often "buy his wicket" by "tossing one up" (in a slower, higher parabolic path) to lure the batsman into making a poor shot

Overs

he bowler bowls the ball in sets of six deliveries (or "balls") and each set of six balls is called an over. This name came about because the umpire calls "Over!" when six balls have been bowled. At this point, another bowler is deployed at the other end, and the fielding side changes ends while the batsmen do not. A bowler cannot bowl two successive overs, although a bowler can bowl unchanged at the same end for several overs. The batsmen do not change ends and so the one who was non-striker is now the striker and vice-versa. The umpires also change positions so that the one who was at square leg now stands behind the wicket at the non-striker's end and vice-versa.

Team structure

A team consists of eleven players. Depending on his or her primary skills, a player may be classified as a specialist batsman or bowler. A well-balanced team usually has five or six specialist batsmen and four or five specialist bowlers. Teams nearly always include a specialistwicket-keeper because of the importance of this fielding position. Each team is headed by a captain who is responsible for making tactical decisions such as determining the batting order, the placement of fielders and the rotation of bowlers.

A player who excels in both batting and bowling is known as an all-rounder. One who excels as a batsman and wicket-keeper is known as a "wicket-keeper/batsman", sometimes regarded as a type of all-rounder. True all-rounders are rare as most players focus on either batting or bowling skills.

Innings

The innings (ending with 's' in both singular and plural form) is the term used for the collective performance of the batting side.^[25] In theory, all eleven members of the batting side take a turn to bat but, for various reasons, an "innings" can end before they all do so.

Depending on the type of match being played, each team has one or two innings apiece. The term "innings" is also sometimes used to describe an individual batsman's contribution ("he played a fine innings").

The main aim of the bowler, supported by his fielders, is to dismiss the batsman. A batsman when dismissed is said to be "out" and that means he must leave the field of play and be replaced by the next batsman on his team. When ten batsmen have been dismissed (i.e., are out), then the whole team is dismissed and the innings is over. The last batsman, the one who has not been dismissed, is not allowed to continue alone as there must always be two batsmen "in". This batsman is termed "not out".

An innings can end early for three reasons: because the batting side's captain has chosen to "declare" the innings closed (which is a tactical decision), or because the batting side has achieved its target and won the game, or because the game has ended prematurely due to bad weather or running out of time. In each of these cases the team's innings ends with two "not out" batsmen, unless the innings is declared closed at the fall of a wicket and the next batsman has not joined in the play

Summary

 dismissed batsman must leave the field, to be replaced by another batsman from the batting team.

If the batsman is successful in hitting the ball away from the wicket without the ball being caught before it hits the ground, the two batsmen may then try to score points (runs) for their team by running across the pitch, switching positions. Each switch of positions is worth one run. The batsmen may attempt multiple runs or they may attempt no runs. By attempting runs, the batsmen risk dismissal, which can happen if the fielding team retrieves the ball and hits a wicket with the ball before a batsman has reached that end of the pitch.

If the batsman hits the bowled ball over the field boundary without the ball touching the field, the batting team scores six runs and may not attempt more. If the ball touches the ground and then goes over the boundary, the batting team scores four runs and may not attempt more. When the batsmen have finished attempting their runs, the ball is returned to the bowler to be bowled again. The bowler continues to bowl toward the same wicket, regardless of any switch of the batsmen's positions.^[23]

After a bowler has bowled six times (an over), another member of the fielding team is designated as the new bowler. The new bowler bowls to the opposite wicket, and play continues. Fielding team members may bowl multiple times during an innings, but may not bowl two overs in succession.

The innings is complete when 10 of the 11 members of the batting team have been dismissed or a set number of overs has been played. The number of innings and the number of overs per innings vary depending on the match.

Laws of cricket

A cricket match is played between two teams of eleven players each^[19][20] on a grassy field, typically 137–150 metres (150–160 yd) in diameter.^[21] The Laws of Cricket do not specify the size or shape of the field^[22] but it is often oval.

A cricket match consists of multiple periods called innings. During an innings, one team plays defense (the fielding team) and the other offense (the batting team). The two teams switch between fielding and batting after each innings. All eleven members of the fielding team take the field, but only two members of the batting team (two batsmen) are on the field at any given time.

The key action takes place in the pitch, a rectangular strip in the centre of the field. The two batsmen face each other at opposite ends of the pitch. The fielding team's eleven members stand outside the pitch, spread out across the field.

Behind each batsman is a target called a wicket. One designated member of the fielding team, called the bowler, is given a ball, and attempts to throw (bowl) the ball from one end of the pitch to the wicket behind the batsman on the other side of the pitch. The batsman tries to prevent the ball from hitting the wicket by hitting the ball with a bat. If the bowler succeeds in hitting the wicket, or if the ball, after being hit, is caught by the fielding team before it touches the ground, the batsman is dismisse

History of cricket

Early cricket was at some time or another described as "a club striking a ball (like) the ancient games of club-ball, stool-ball, trap-ball, stob-ball".^[3] Cricket can definitely be traced back to Tudor times in early 16th-century England. Written evidence exists of a game known as creagbeing played by Prince Edward, the son of Edward I (Longshanks), at Newenden, Kent in 1301^[4] and there has been speculation, but no evidence, that this was a form of cricket.

A number of other words have been suggested as sources for the term "cricket". In the earliest definite reference to the sport in 1598,^[5] it is called creckett. Given the strong medieval trade connections between south-east England and the County of Flanders when the latter belonged to the Duchy of Burgundy, the name may have been derived from the Middle Dutch^[6] krick(-e), meaning a stick (crook); or the Old English cricc or cryce meaning a crutch or staff.^[7] In Old French, the word criquet seems to have meant a kind of club or stick.^[8] In Samuel Johnson's Dictionary, he derived cricket from "cryce, Saxon, a stick".^[9] Another possible source is the Middle Dutch word krickstoel, meaning a long low stool used for kneeling in church and which resembled the long low wicket with two stumps used in early cricket.^[10]According to Heiner Gillmeister, a European language expert of Bonn University, "cricket" derives from the Middle Dutch phrase for hockey,met de (krik ket)sen (i.e., "with the stick chase").^[11] Dr Gillmeister believes that not only the name but the sport itself is of Flemish origin.^[1

Cricket

Cricket is a bat-and-ball game played between two teams of 11 players on an oval-shaped field, at the centre of which is a rectangular 22-yard long pitch. One team bats, trying to score as many runs as possible while the other team bowls and fields, trying to dismiss the batsmen and thus limit the runs scored by the batting team. A run is scored by the striking batsman hitting the ball with his bat, running to the opposite end of the pitch and touching the creasethere without being dismissed. The teams switch between batting and fielding at the end of an innings.

In professional cricket the length of a game ranges from 20 overs of six bowling deliveries per side to Test cricket played over five days. The Laws of Cricket are maintained by the International Cricket Council (ICC) and the Marylebone Cricket Club (MCC) with additional Standard Playing Conditions for Test matches and One Day Internationals.^[1]

Cricket was first played in southern England in the 16th century. By the end of the 18th century, it had developed into the national sport of England. The expansion of the British Empire led to cricket being played overseas and by the mid-19th century the first international matches were being held. The ICC, the game's governing body, has ten full members.^[2]